Are you on the lookout for a bathtub disinfectant to disinfect the bathtub, and have a wonderful moment in a hygienic bathtub? Search no more! here is the top 3 bathtub disinfectant.
Top 4 Bathtub Disinfectant
These bathtub disinfectants are EPA-approved not just to fight common germs, but also against newly emerging pathogens including the novel coronavirus. Therefore, you can use this disinfectant during the coronavirus outbreak to protect yourself and your family.
Asides from being a bathtub disinfectant, you can also use it to clean hard and non-porous surfaces such as sinks, countertops, and porcelain, and have an all-around hygienic home.
However, before you disinfect a surface, it is important you first pre-clean the surface prior to applying the disinfectant.
The bathtub disinfectant except for the seventh Generation Disinfecting Multi-Surface Cleaner is not made from eco-friendly ingredients but from chemicals. Therefore, be sure to read the safety precautions on the label before using the cleaner disinfectant. Here are the common safety precautions:
- Do not mix with any household chemical
- Keep out of reach of children
- Avoid contact with eyes by wearing safety glasses or goggles
- To prevent inhaling wear a face mask and use it in a well-ventilated area especially if you suffer from allergies.
- Avoid contact with skin
Complete RTU Bowl & Bath Disinfectant
RTU bowl and bath disinfectant can be used on bathtubs, walls, toilets, shower stalls, and floors. It cleans, disinfects, and deodorizes in one step.
Although, this is a one-step disinfectant, first remove heavy soil perhaps with the product from the bathtub, before you apply the RTU for disinfecting.
Apply the product with a hand pump trigger on the surface from 6 to 8 inches until thoroughly wet, wait for 2 minutes for disinfecting, and 5 minutes for combating the coronavirus, before wiping the surface clean with a microfiber cloth, you can as well allow the surface to air dry.
Besides the bathtub, you can use the RTU bowl and bath disinfectant on other hard, non-porous surfaces to get rid of germs. You can as well use it to clean and disinfect toilet bowls and urinals.
You can use it for general cleaning, disinfecting, and deodorizing. For general cleaning, spray the surface, (the trigger spray is not included) then wipe with a microfiber cloth or dry paper toilet, and you should do this before applying the RTU for disinfecting if the bathtub is dirty.
To use the disinfectant for the toilet bowl, simply squirt the disinfectant on the toilet bowl, scrub it with a toilet brush, let it sit for 2 minutes, and then flush.
It is EPA registered, it leaves behind a fresh, clean bathtub, but make sure you use it with caution.
Features
- Kills 99.99% of bacteria and viruses
- One-step cleaner disinfectant
- EPA registered
Tilex 35604 disinfecting Soap Scum Remover
This is more than a bathtub cleaner disinfectant; this is a cleaner disinfectant for commercial solutions.
Moreover, it is listed under the products that comply with EPA’s emerging viral pathogen guidance for antimicrobial pesticides, and it can be used as a disinfectant during the coronavirus pandemic.
The Clorox tilex cleaner disinfectant is bleach-free yet it kills 99.99% of bathroom germs with the aid of varieties of ammonium chloride compounds.
It cuts through soap scum without scrubbing, and after using it to get rid of soap scum and dirt you can reapply it for disinfection.
The Tilex disinfecting soap scum remover is safe to use on the bathtub, tile, shower, toilet, and grout. The compatible surfaces include ceramic, fiberglass, glass, laminate, sealed stone, polished metal, and vinyl. Don’t use on marble. You can also use it on no-wax floors.
As a cleaner disinfectant for commercial solutions, it is ideal for cleaning, deodorizing, and disinfecting daycare centers, restaurants, hotels, and other commercial facilities.
To use tiles as a disinfectant first pre-clean the surface by removing the soap scum and soil, then spray 6 to 8 inches from the tub until thoroughly wet, and leave for 10 minutes before wiping clean.
Owing to the smart tube technology, you can spray your way to a clean bathtub to the last drop.
It is bleach-free, but not harmless, so be sure to follow the safety precautions on the label.
Features
- Cleaner disinfectant
- EPA registered
- Bleach free
- Ideal for use in bathrooms, kitchen, and locker rooms
- Product dimensions: 4.9 x 3 x 10.1 inches
- Weighs 2.2 pounds
Clorox Ultra Clorox Germicidal Bleach
The Clorox germicidal bleach is not the regular Clorox bleach spray bottle to disinfect bathtub, this one is quite powerful, containing about 8.25% of sodium hypochlorite even more powerful than the regular household bleach. Hence, before use, dilute the germicidal bleach with water.
It is EPA registered. It is great for cleaning surfaces and you can as well use it for laundry. It fights mold and mildew stains as it disinfects.
You can use it on several hard and non-porous surfaces for cleaning and disinfecting, including bathtubs, countertops, faucets, floors, and cabinets.
The compatible surfaces include linoleum, glass, ceramic tile, vinyl, sealed granite, fabric, and glazed tile cement/concrete.
The Clorox germicidal bleach is EPA registered for killing multiple organisms lurking on your bathtub, around the bathroom, and at home in no time, including Clostridium spores, salmonella, E. coli, and listeria.
It destroys multiple strains of MRCA (Most recent common ancestor) norovirus and 3 strains of influenza.
It is also effective against bacteria, fungus, germs, grease, mildew, stains, organic matter, and soil.
Features
- EPA registered disinfectant
- Unscented
- Suitable on most household surfaces and for laundry
- Effective against bacteria, germs, mold mildew, organic matter, soil, and stains
- Weighs 28.4 pounds
How to use the Clorox ultra germicidal bleach for bathtub disinfecting
The same process also applies to other surfaces
Step one
Put on the safety gear- safety glasses, rubber gloves, masks, etc.
Step two
Temporarily remove bath mats, shampoo, soap dishes, and other materials from around the bathtub, wipe the tub with a wet sponge, and remember to ventilate the bathroom.
Step three
Pour ½ cup of the germicidal bleach into one gallon of water (do not skip this step)
Step four
Then wipe the tub with bleach solution
Step five
Let it stand for 6 minutes for disinfecting
Step six
Then rinse with warm water and let it air dry
Conclusion
A bathtub cleaner can do a good cleaning job on the bathtub, but you need a bathtub disinfectant to disinfect the bathtub. Besides, the bathtub disinfectant doubles as a cleaner and disinfectant. This means before you disinfect the bathtub, first use the disinfectant to clean the surface, then after cleaning, reapply on the surface to disinfect.
